How many teeth is best for a table saw blade? (2023)

What is an 80 tooth saw blade used for?

This blade is excellent for projects such as cutting fine molding and double-sided veneered plywood for cabinets and furniture.

How many teeth on a saw blade is best?

Number of Teeth

Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.

What is a 24-tooth saw blade good for?

Framing blades have 24 teeth and are effective for jobs such as rough carpentry, where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.

What is a 40 tooth saw blade used for?

This saw blade has 40 teeth for a fine finish that is perfect for cutting hardwoods, softwoods, plywood and many more. The blade creates a clean finish when cutting and leaves it chip free for less sanding.

What is a 100 tooth saw blade used for?

Cuts fine molding, hardwoods, softwoods, veneered plywood, melamine and more.

What is a 120 tooth saw blade used for?

Excellent for use in cutting softwoods, hardwoods, density board, plywood, shaving board, and wood composites. Good toughness and wear resistance, suitable for high speed cutting, bearing a heavy cutting force and achieving good surface finish.

How many teeth is best for cutting wood?

The general rule of thumb is:

For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.

What saw blade makes the smoothest cut?

A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.

What is a 60 tooth saw blade good for?

60-Tooth blade produces a remarkably clean, chip-free cut that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding.

Does the number of teeth on a saw blade matter?

Generally, the higher the amount of saw blade teeth, the better the quality of cut and finishing. If you're looking for a faster and rougher cut, then a blade with fewer teeth will be more suitable.

What is a 90 tooth saw blade used for?

Cuts fine molding, hardwoods, softwoods, veneered plywood, melamine and more.

Why is the number of teeth on a saw blade important?

Number Of Teeth

In general, blades with more teeth yield a smoother cut, and blades with fewer teeth remove material faster. A 10" blade designed for ripping lumber, for example, usually has as few as 24 teeth and is designed to quickly remove material along the length of the grain.

What is 140 tooth saw blade used for?

x 140-Tooth OSB/Plywood Circular Saw Blade has a high tooth count designed for clean cuts in oriented-strand board (OSB) and plywood. This high-quality steel blade is an economical choice that's well suited for household DIY projects and construction.

You might also like
Popular posts
Latest Posts
Article information

Author: Ray Christiansen

Last Updated: 02/16/2023

Views: 5811

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.